|MediaDice Solid State Drive Disintegrator (MD-SSD/D)
|Shipping Weight (including packing, crating, pallet)
|42″ Wide (from left to right)
34″ Deep (front to back of machine)
44″ High (floor to top of machine)
|Power Requirements (voltage/frequency/current)
|See label on the rear of your machine for specific factory settings
220-240 Volts A.C, Single or 3 Phase
|11 Amps (no load)
|Power Cord Included
|Length: 10ft. 12 AWG, 4 Conductor, grounded NEMA L15-20P locking plug
|Ambient Operating Tempature
|Media Sanitization Modality
|Knife Mill disintegrated media to nominal edge length of 2mm or less.
|Media machine designed to sanitize
|1.8″ and 2.5″ SSds.
Also sanitizes SIM Cards, FLash Cards, CAC ID, EMV Credit Cards, Magnetic Strip Cards, CDs, DVDs, Blue Rays, small Circuit Boards, Memory Cards and USB Flash Drives
In reality the manual feed will only accept SSd’s, optical media and other media including small low-profile circcuit boards up to the size of an SSD or CD/DVD
|Media Sanitization Throughput
|360 SSDs per hour (avg. 1 SSD every 10 seconds)
Has built in casters for mobility, and leveling feet for stability.
|Machine Control/ Monitoring
|Switch on manually.
Security access, machine control and status via PLC touch screen.
|Auto loader with 25 SSD capacity cassette
Manual feed port for inserting one device at a time
|Media are disintegrated in knife mill chamber and extracted directly into an on-board HEPA Vacuum
|Automatic shutdown if media jam is detected either in the auto-loader or in the knife mill. It can manually be unjammed and restart the operation.
|Completely automatic, hands-off operation. Won’t operate if lock-out doors are not completely closed preventing hands of pieces of clothing from being accidently caught in the moving parts of the machine.
User never has to touch potentially dangerous debris,
HEPA Filtration to meet with MRV8 air quality standard.
|100,000 SSDs and other media MTBFD
Period replacement of vacuum bag and/or HEPA Filters by user. Periodic service by qualified service personnel approved by PHiston may be required to adjust, sharpen or replace the knife mill blades, or re-tension the knife mill drive belt.
|On-call technical support service department; nationwide and international technical support team that can be deployed if and when repairs or maintenance needed.